Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
It can save at least 3% of the fuel cost every year. More >> Oil/Gas Fired Boiler. Hot Water Boiler. Hot Water Boiler. EPCB oil/gas fired hot water boiler series, equipped with original imported burner, combines corrugated furnace and threaded flue pipe perfectly, greatly increases the heating area, equipped with high-standard energy-saving
140,000 BTU/gallon for heating oil; Fuel Efficiency. There is one more factor that needs to be taken into account when judging propane vs oil – fuel efficiency. Gas furnaces (both natural gas and propane) convert a higher proportion of their fuel supply into heat than oil burners do.
A single gallon of fuel oil is about $3.30 to $3.40 this year as reported by Adams and Glassmere fuel oil companies. One gallon of fuel oil has the potential to produce between 137,400 and 152,400 BTUs depending on the quality of the oil. With fuel oil prices being so low, and such a large BTU output from fuel oil, it’s easy to see how
Subcategories of small boilers include coal, biomass, oil, seasonal, boilers with an oxygen trim system, and limited-use. An existing dual-fuel fired boiler meeting the definition of gas-fired boiler that becomes subject to NESHAP JJJJJJ after June 4, 2010, due to a fuel switch is an existing affected source as long as
Mar 17, 2015· Steam, Boiler, and Blowdown Pressure are the same. Combustion Efficiency is the % of fuel energy that is directly added to the feedwater and not otherwise lost or used. Blowdown Rate is the % of incoming feedwater mass flow rate that leaves the boiler as a saturated liquid at boiler pressure.
Fuel oil treatment Serving the power, oil and gas industries. 2 Fuel oil treatment Boosting performance and profits Fuel costs can be as volatile as the fuel oils themselves. A cost-effective and reliable fuel oil treatment solution that enables the use of lower-priced fuel …
Boiler Fuel Cost Consumption Calculator Fuel Cost Comparison - Oil vs. Gas. The following tables are used to calculate values based on what is put in the boxes. The values will recalculate in different units of measure. The first two tables are to calculate competitive fuel costs between #6 fuel oil and natural gas.
The cost is less than $100 and could save you about 5% of your fuel cost. Derating or Replacing Oil Burners Derating is the practice of installing a lower gallon per hour (GPH) rated nozzle in an oil fired combustion appliance to reduce fuel use.
Adams Manufacturing Website. Adams UNI-PAK Waste Oil Heaters available from 75,000 BTU/HR to 500,000 BTU/HR and 150,000 BTU/HR Portable Units . Burns crankcase and gear oil, transmission or hydraulic fluid and cooking oils up to 90 weight oils.
User rating: 3.5/5 The Bosch Greenstar boiler is small, ultra quiet, environmentally friendly, and uses fuel-efficient condensing technology to deliver an AFUE rating of 95%. The Greenstar is available in two models—combi (ZWB) for space and tankless water heating or the space heating (ZBR), which can be used with our DHW tanks.
Oil Boiler Price. Homeowners spend an average of $5,127 to install new boilers. The oil boiler itself may cost $2,500 to $3,000, but homeowners must also factor in additional fittings and hardware, which can cost up to $80. Hiring an HVAC professional costs an average of $1,246 to $1,775 for approximately 14 to 15 hours of work. Oil Boiler Cost
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.